4000 Commercial Series SnowBlowers

Available in multiple widths, these dual augers industrial grade snow blowers have 6-blade fans that make easy work of your lot. Each model is available with a rotating housing, allowing you to discharge either to the left or right of the blower, bypassing the chute completely for tighter control on blowing over shorter distances. Each model is also available with a truck loading chute, giving you additional height for easy clearance when blowing snow into trucks.

Description

Specifications

Models	4097	4108	4120
HP (Rec.)	200	200	200
Cutting Width	97″	108″	120″
Main Body Height	47″	47″	47″
Mount	CAT. 2 & 3	CAT. 2 & 3	CAT. 2 & 3
Impeller (Fan)	32″ – 3/8″ AR400	32″ – 3/8″ AR400	36″ – 3/8″ AR400
Impeller Depth	12″	12″	12″
Impeller Blades	6	6	6
Impeller Output Shaft	2 1/2″	2 1/2″	2 1/2″
Rotating Housing	NA	NA	NA
PTO Drive (RPM)	1,000	1,000	1,000
Stages	2	2	2
Rotor	Ribbon Flighting (Flight Notching Available)
Rotor (Tube)	4 1/2″ OD HEAVY WALL
Rotor (Flighting)	1/2 x 3 (bottom) 5/16 x 2-1/4 (top)	1/2 x 3 (bottom) 5/16 x 2-1/4 (top)	1/2 x 3 (bottom) 5/16 x 2-1/4 (top)
Rotor (Diameter)	23″ (bottom) 15″ (top)	23″ (bottom) 15″ (top)	23″ (bottom) 15″ (top)
Rotor (Drive Shaft)	1-3/4″	1-3/4″	1-3/4″
Roller Chain	#100	#100	#100
Cutting Edge	1/2″ x 6″ Heat Treated Bolt-On	1/2″ x 6″ Heat Treated Bolt-On	1/2″ x 6″ Heat Treated Bolt-On
End Plates	3/8″ AR400 x 48″ high	3/8″ AR400 x 48″ high	3/8″ AR400 x 48″ high
Chute Diam.	13″	13″	13″
Chute Rotator	Hyd.	Hyd.	Hyd.
Deflector Stages	2	2	2
Chute Deflector	Hyd.	Hyd.	Hyd.
Work Light Kit	Std. (TL Models Only)*	Std. (TL Models Only)*	Std. (TL Models Only)*
Weight	2,050 lbs.	2,130 lbs.	3,010 lbs.

4000 Series with Rotating Housing

Models	4097RH	4108RH	4120RH
HP (Rec.)	200	200	200
Cutting Width	97″	108″	120″
Main Body Height	47″	47″	47″
Mount	CAT. 2 & 3	CAT. 2 & 3	CAT. 2 & 3
Impeller (Fan)	32″ – 3/8″ AR400	32″ – 3/8″ AR400	36″ – 3/8″ AR400
Impeller Depth	12″	12″	12″
Impeller Blades	6	6	6
Impeller Output Shaft	2 1/2″	2 1/2″	2 1/2″
Rotating Housing	Std.	Std.	Std.
PTO Drive (RPM)	1,000	1,000	1,000
Stages	2	2	2
Rotor	Ribbon Flighting (Flight Notching Available)
Rotor (Tube)	4 1/2″ OD HEAVY WALL
Rotor (Flighting)	1/2 x 3 (bottom) 5/16 x 2-1/4 (top)	1/2 x 3 (bottom) 5/16 x 2-1/4 (top)	1/2 x 3 (bottom) 5/16 x 2-1/4 (top)
Rotor (Diameter)	23″ (bottom) 15″ (top)	23″ (bottom) 15″ (top)	23″ (bottom) 15″ (top)
Rotor (Drive Shaft)	1-3/4″	1-3/4″	1-3/4″
Roller Chain	#100	#100	#100
Cutting Edge	1/2″ x 6″ Heat Treated Bolt-On	1/2″ x 6″ Heat Treated Bolt-On	1/2″ x 6″ Heat Treated Bolt-On
End Plates	3/8″ AR400 x 48″ high	3/8″ AR400 x 48″ high	3/8″ AR400 x 48″ high
Chute Diam.	13″	13″	13″
Chute Rotator	Hyd.	Hyd.	Hyd.
Deflector Stages	2	2	2
Chute Deflector	Hyd.	Hyd.	Hyd.
Work Light Kit	Std. (TL Models Only)*	Std. (TL Models Only)*	Std. (TL Models Only)*
Weight	2,500 lbs.	2,580 lbs.	3,460 lbs.