Description
Specifications
| Model | LP678 | LP778 | LP878 |
| Working Width | 72″ | 84″ | 96″ |
| Overall Width | 77″ | 89″ | 101″ |
| Length | 69.5″ | 69.5″ | 69.5″ |
| Shank (Qty.) | 6 | 7 | 8 |
| Shank Tube | 4″ x 6″ x 1/4″ | 4″ x 6″ x 1/4″ | 4″ x 6″ x 1/4″ |
| Cutting Edge (x2) | Hardened 1/2″ – Reversible 1″ Adjustments | ||
| Skid Shoes | 3/8″ x 2 Reversible | 3/8″ x 2 Reversible | 3/8″ x 2 Reversible |
| Cylinder | Dual Hydraulic Cylinders for shank rotation | ||
| Weight (LBS.) | 1,140 | 1,240 | 1,350 |
Long Wearing Shanks
Long wearing grader quality shanks feature height adjustment and replaceable chisel tips.
Hydraulic Cylinders
Two hydraulic cylinders power the scarifier bar deep below the surface loosening the hard pan and pulling the material to the surface where it can be redistributed.
1/2″ Reversible Hardened Cutting Edges
With two half inch reversible hardened cutting edges material is quickly leveled or redistributed to fill low points as the unit passes.
Bolt-On Skid Shoes
The bolt-on skid shoes allows the Grader Leveler to effortlessly run over your path without damaging the product, or damaging the area you’re leveling.
Optional Skidsteer Adaptor
The Grader Leveler can be mounted either with a skidsteer mount. Additionally, each Grader Leveler can be equipped with both a skidsteer and 3PH mount allowing for more versatility when leveling your property.
Optional 3PH Adaptor
The Grader Leveler can be mounted either with a 3PH mount. Additionally, each Grader Leveler can be equipped with both a skidsteer and 3PH mount allowing for more versatility when leveling your property.
Flow Over Design
Flow over design means operators don’t need to raise the Grader Leveler to release the material.
